Mechanical, Motion & Hardware
Fasteners & Fixings
We source and supply fasteners and fixings for defence, aerospace and industrial procurement teams. This family covers threaded and mechanical fastening hardware specified by type, thread size, length, head form, material or grade, and recognised dimensional standard.
Product-type coverage
- Machine screws
- Set screws and bolts (hex head, socket head)
- Hexagon and socket-head cap screws
- Self-tapping and thread-forming screws
- Hex nuts, lock nuts and nyloc nuts
- Flat, spring and shakeproof washers
- Threaded studs and threaded rod / studding
- Anchors and wall fixings
- Rivets and blind fasteners
- Retaining and circlip-type fixings
Common standards & series
Typical selection attributes
"Fasteners & Fixings is a product family under the Mechanical, Motion & Hardware pillar. It is a single catalogue category; type, thread/M-size, length, head form, material/grade and standard (DIN/ISO) are selection filters applied within this category, not separate sub-pages. Buyers narrow the filterable product table by these attributes rather than navigating to distinct child categories."
Representative approved manufacturers
Bossard; RS PRO — references for identification and RFQ only.
Products
"A filterable product table populates this page after product import. No products are listed yet. Filters will allow narrowing by type, thread / M-size, length, head form, material / grade and standard (DIN / ISO)."
RFQ information checklist
- Type required (screw, bolt, nut, washer, stud, anchor, rivet)
- Thread / M-size and pitch where non-standard
- Length and any tolerance requirement
- Head form and drive type
- Material and grade / property class (e.g. A2, A4, 8.8, 10.9)
- Finish or coating
- Applicable DIN / ISO standard reference, if specified
- Quantity required and any packaging preference
- Part number or manufacturer reference, if known
Related
Mechanical, Motion & Hardware (parent pillar) · Bearings & Bushings · Seals, Gaskets & O-Rings · Springs & Retaining Hardware
Frequently asked questions
What types of fasteners and fixings can BOLTON source?
We source and supply screws, bolts, nuts, washers, studs and studding, anchors, rivets and related fixings. Requirements can be defined by type, thread size, length, head form, material or grade, and dimensional standard. Send your specification and we will identify and quote against it.
Can I request fasteners against a DIN or ISO standard?
Yes. DIN and ISO series such as DIN 912, DIN 933, DIN 934 or ISO 4762 and ISO 4014 are commonly used to identify a fastener's dimensions and form. We use these references for identification and selection when preparing a quotation. Standard references identify the item; they are not a compliance claim held by BOLTON.
Which selection details help you quote accurately?
The most useful details are type, thread / M-size, length, head form, drive type, material and grade or property class (for example A2, A4, 8.8 or 10.9), finish, applicable standard, quantity, and any part number you already hold.
Do you provide part numbers and manufacturer references?
Manufacturer and part-number references may be shown for identification and RFQ purposes only. They do not imply endorsement, authorisation, or that a specific item is held. Provide a reference if you have one and we will use it to identify the requirement.
How do I get a price or check availability?
Submit a Request a Quote with your fastener specification and quantity. We respond with a quotation against your requirement. Pricing and availability are confirmed at quotation rather than published on this page.